These are some of the nastiest individuals within the ranks of the Iron
Grenadiers. The Cremator's primary weapon system is the MARS-240 Flame
Unit, which is designed for close combat situations at the squad and
fire team level. The weapon uses a pressurized form of napalm which is
ignited at the nozzle burner, and can be used to cover an area up to 25
meters. With a standard fuel reservoir good for up to 20 bursts, the
flame unit is considered to be one of the most fierce weapons in the
MARS armory. However, the fuel reservoir has a tendency to rupture
violently when hit by shrapnel or small arms fire. Cremators are outfitted with special fire-resistant suits and a closed-system breathing apparatus.Wednesday, October 24, 2012
Cremator (Iron Grenadier Flame Weapons Specialist)
These are some of the nastiest individuals within the ranks of the Iron
Grenadiers. The Cremator's primary weapon system is the MARS-240 Flame
Unit, which is designed for close combat situations at the squad and
fire team level. The weapon uses a pressurized form of napalm which is
ignited at the nozzle burner, and can be used to cover an area up to 25
meters. With a standard fuel reservoir good for up to 20 bursts, the
flame unit is considered to be one of the most fierce weapons in the
MARS armory. However, the fuel reservoir has a tendency to rupture
violently when hit by shrapnel or small arms fire. Cremators are outfitted with special fire-resistant suits and a closed-system breathing apparatus.Tuesday, October 23, 2012
Another Contest? Sure!
When I
first started Tales from Castle Destro, I began tying it together with
my collection of custom Iron Grenadier action figures. I have created
(or am in the process of creating) a figure for every character featured
in the stories. Because I really like to keep you guys involved, I am
going to hold a custom contest. There won't be a physical prize for
this one - instead, the winner will have his or her custom incorporated
into the story. This excerpt from the upcoming Chapter 63 will provide a
bit of background:
"One of the things that had plagued them repeatedly throughout the SKAR War was an inability to respond to a specific location quickly enough, with the right forces. In the past, this had never been an issue. As a private military corporation, MARS and the Grenadiers normally chose their battles carefully, based upon the potential for business, and then deployed the appropriate forces to handle a particular mission. However, when forced to react to the actions of an aggressor, they often found themselves responding flat-footed. Destro’s intent was to reorganize a significant portion of the Grenadiers total force into all-purpose units that could respond quickly to any locale and then independently sustain combat operations for a period of time without relief or resupply. This was not a new concept; many nations had been structuring their militaries this way for years, but it was a fairly expensive one due to the redundancies required for each unit to be self-sustaining. Destro’s plan called for the creation of four Rapid Response Brigades, each commanded by a Colonel. A brigade was to consist of three infantry battalions, one artillery battalion, one mechanized battalion, one air group and a headquarters group. The core of the brigade would be the three infantry battalions. The artillery battalion would provide each of the infantry battalions with a dedicated battery for long-range fire support. The mechanized battalion would provide two companies of Ogre APCs to enhance the mobility of the infantry units. Additionally, the mechanized battalion added the firepower of one company each of DEMONs and Razorbacks. The air group would consist of three cavalry troops of Razor Gunships and one attack squadron of AGPs. This would give the brigade additional troop transport, as well as aerial fire support and fighter interceptor capabilities. The headquarters group would be the centralized command element for the entire organization."
So those that are paying close attention are probably wondering what sort of artillery assets the Iron Grenadiers have... The answer is none. It's your job to come up with some! You are the MARS Industries Weapons Designer and you need to design weapon systems for the brigade artillery battalion. This can be a towed artillery piece or a self propelled weapon. You'll need to provide technical data and be able to explain the basic operation of the weapon. My only real stipulation is that the weapon system must be able to fire conventional artillery shells (High Explosive, White Phosphorous, Illumination, etc) - nothing too far into the sci-fi realm. The winning entry will be included in future chapters of Tales from Castle Destro. Additionally, I will copy it and add it to my personal collection. And because I like prizes... I'll also have a little something to send the winner.
Entries are to be submitted to sgthumpty@gmail.com no later than November 10th, 2012. Please include all technical data and at least three (3) photos of the finished custom.
Now get to work - Laird Destro is waiting!
"One of the things that had plagued them repeatedly throughout the SKAR War was an inability to respond to a specific location quickly enough, with the right forces. In the past, this had never been an issue. As a private military corporation, MARS and the Grenadiers normally chose their battles carefully, based upon the potential for business, and then deployed the appropriate forces to handle a particular mission. However, when forced to react to the actions of an aggressor, they often found themselves responding flat-footed. Destro’s intent was to reorganize a significant portion of the Grenadiers total force into all-purpose units that could respond quickly to any locale and then independently sustain combat operations for a period of time without relief or resupply. This was not a new concept; many nations had been structuring their militaries this way for years, but it was a fairly expensive one due to the redundancies required for each unit to be self-sustaining. Destro’s plan called for the creation of four Rapid Response Brigades, each commanded by a Colonel. A brigade was to consist of three infantry battalions, one artillery battalion, one mechanized battalion, one air group and a headquarters group. The core of the brigade would be the three infantry battalions. The artillery battalion would provide each of the infantry battalions with a dedicated battery for long-range fire support. The mechanized battalion would provide two companies of Ogre APCs to enhance the mobility of the infantry units. Additionally, the mechanized battalion added the firepower of one company each of DEMONs and Razorbacks. The air group would consist of three cavalry troops of Razor Gunships and one attack squadron of AGPs. This would give the brigade additional troop transport, as well as aerial fire support and fighter interceptor capabilities. The headquarters group would be the centralized command element for the entire organization."
So those that are paying close attention are probably wondering what sort of artillery assets the Iron Grenadiers have... The answer is none. It's your job to come up with some! You are the MARS Industries Weapons Designer and you need to design weapon systems for the brigade artillery battalion. This can be a towed artillery piece or a self propelled weapon. You'll need to provide technical data and be able to explain the basic operation of the weapon. My only real stipulation is that the weapon system must be able to fire conventional artillery shells (High Explosive, White Phosphorous, Illumination, etc) - nothing too far into the sci-fi realm. The winning entry will be included in future chapters of Tales from Castle Destro. Additionally, I will copy it and add it to my personal collection. And because I like prizes... I'll also have a little something to send the winner.
Entries are to be submitted to sgthumpty@gmail.com no later than November 10th, 2012. Please include all technical data and at least three (3) photos of the finished custom.
Now get to work - Laird Destro is waiting!
Wednesday, October 3, 2012
Author's Notes
After taking a short break, I am now back at work on Tales from Castle Destro. I hope to have a new chapter up very soon. The first chapter of each new volume seems to be the one I struggle with most.
At the same time, I have a few other things brewing...
One of the most common critiques I've received from readers is that I don't spend enough time explaining what a particular character or trooper type looks like. Readers who didn't grow up playing with G.I. Joe toys had a difficult time picturing what some of the characters were supposed to look like. I am told that this is a fairly common problem because the characters are crystal clear in the writer's mind, so it becomes easy to forget that others might not be as clear. I have two solutions to this dilemma. First, I am working on a Visual Reference Guide. Most of you are probably aware that long before I started writing, I was making custom Iron Grenadier action figures. In fact, I have created figures for almost every single character that appears in Tales from Castle Destro. The Visual Reference Guide will feature photos of these figures as a means of illustrating each character, along with a brief biography of the character. A rough version of this guide is already available on the right-hand side of the blog page. I'd love to hear what you think of it. Second, I am planning to review the first 63 chapters of Tales from Castle Destro and make some minor edits where I think it will help correct this issue. Nothing that will change the course of the story, mind you - but if I can insert a sentence or two that clarifies what a character looks like, then it's worth the time.
You may notice that I have gone back and renumbered the chapters. This was also a common source of confusion for many people. So rather than having each volume start over at Chapter 1, each volume now continues where the previous one left off. Volume I contains Chapters 1 through 22, Volume II contains Chapters 23 through 42 and Volume III contains Chapters 43 through 62. The next chapter I publish will be 63. Once I am done with the edits I mentioned above, I will be uploading revised versions of all three e-books.
As always, I want to thank those who have supported this blog and the three e-books it has spawned. The first Tales from Castle Destro story was published exactly one year ago today. Without your support and feedback, I doubt I would have continued with it this long. I appreciate it and I hope that I can continue to entertain you for a while longer. :)
At the same time, I have a few other things brewing...
One of the most common critiques I've received from readers is that I don't spend enough time explaining what a particular character or trooper type looks like. Readers who didn't grow up playing with G.I. Joe toys had a difficult time picturing what some of the characters were supposed to look like. I am told that this is a fairly common problem because the characters are crystal clear in the writer's mind, so it becomes easy to forget that others might not be as clear. I have two solutions to this dilemma. First, I am working on a Visual Reference Guide. Most of you are probably aware that long before I started writing, I was making custom Iron Grenadier action figures. In fact, I have created figures for almost every single character that appears in Tales from Castle Destro. The Visual Reference Guide will feature photos of these figures as a means of illustrating each character, along with a brief biography of the character. A rough version of this guide is already available on the right-hand side of the blog page. I'd love to hear what you think of it. Second, I am planning to review the first 63 chapters of Tales from Castle Destro and make some minor edits where I think it will help correct this issue. Nothing that will change the course of the story, mind you - but if I can insert a sentence or two that clarifies what a character looks like, then it's worth the time.
You may notice that I have gone back and renumbered the chapters. This was also a common source of confusion for many people. So rather than having each volume start over at Chapter 1, each volume now continues where the previous one left off. Volume I contains Chapters 1 through 22, Volume II contains Chapters 23 through 42 and Volume III contains Chapters 43 through 62. The next chapter I publish will be 63. Once I am done with the edits I mentioned above, I will be uploading revised versions of all three e-books.
As always, I want to thank those who have supported this blog and the three e-books it has spawned. The first Tales from Castle Destro story was published exactly one year ago today. Without your support and feedback, I doubt I would have continued with it this long. I appreciate it and I hope that I can continue to entertain you for a while longer. :)
Tuesday, October 2, 2012
Iron Grenadier Infantryman
This is what I've come up with
as my 'standard' for an Iron Grenadier Infantryman. The distinct lack of spare ammunition, grenades and other combat essentials had always bothered me, much like the ceremonial
swords, which I felt were
impractical to wear into combat. So I designed an infantryman's belt
for all of my IG infantry forces. I made it by taking an Iron Grenadier
belt, cutting the sword scabbard off and then attaching pouches and
other items to it. The IG infantryman's belt features (6) rifle
magazines, (1) utility pouch, (3) hand grenades and (1) canteen. The belt is now available from Raginspoon.
Iron Grenadier Infantry Officer
During the 25th Anniversary line, one of the Senior Ranking Officers sets featured Destro and a pair of Iron Grenadiers. Oddly, one of the Grenadiers featured purple in place of red in the traditional Grenadiers' paint scheme. This figure was designated as the Iron Grenadier Trooper. The Grenadier in red was designated as an Officer. Like many, I considered this to be a packaging error, largely for my own convenience. Since the black, gold and red troopers were more readily available than the black, gold and purple, it made sense that the more common figure would be the enlisted trooper. This led to my adopting purple as the standard for IG Officers. This is what I've come up with as my 'standard' for an Iron Grenadier Infantry Officer. Each Grenadier's helmet is equipped with an intra-unit communications package, allowing troops to talk to each other during combat operations. However, the Officer's helmet incorporates global communications system, which allows the unit commander on the battlefield to communicate directly with Castle Destro. The ceremonial swords are still a part of the official uniform, but I felt they were impractical to wear into combat. So I designed an infantryman's belt for all of my IG infantry forces. I made it by taking an Iron Grenadier belt, cutting the sword scabbard off and then attaching pouches and other items to it. The IG infantryman's belt features (6) rifle magazines, (1) utility pouch, (3) hand grenades and (1) canteen. Both the helmet and the belt are now available from Raginspoon.


Thursday, September 13, 2012
Fan-Fic Spotlight
As I said last week, writing Tales from Castle Destro has allowed me to discover some great fan-fic
authors. Another of these authors is a young lady who publishes at fanfiction.net under the name Firestar9mm.
Here is my current favorite of her stories, Breathless, which takes place 'between the scenes' in the old Sunbow episode, Cobra's Candidate. I know you're going to like it, so make sure you leave a comment for the author!
Friday, September 7, 2012
Tales from Castle Destro (Press Release)
I am pleased to announce that my third ebook, Tales from Castle Destro Volume III - Vengeance, is now available as a free download at www.smashwords.com. The link
should take you directly to the page where you can download the ebook in any
of the following formats:| Format | Full Book |
|---|---|
| Online Reading (HTML, good for sampling in web browser) | View |
| Online Reading (JavaScript, experimental, buggy) | View |
| Kindle (.mobi for Kindle devices and Kindle apps) | Download |
| Epub (Apple iPad/iBooks, Nook, Sony Reader, Kobo, and most e-reading apps including Stanza, Aldiko, Adobe Digital Editions, others) | Download |
| PDF (good for reading on PC, or for home printing) | Download |
| RTF (readable on most word processors) | Download |
| LRF (Use only for older model Sony Readers that don't support .epub) | Download |
| Palm Doc (PDB) (for Palm reading devices) | Download |
| Plain Text (download) (flexible, but lacks much formatting) | Download |
| Plain Text (view) (viewable as web page) | View |
Thursday, September 6, 2012
2012 CoilCon Exclusive Story
A little while back, Jay Hunger, the
proprietor of CardedHeroes.com
and one of the organizers of the COIL
Club's annual CoilCon, contacted me to ask if I'd be willing to help write the file
cards and a short back story to set the stage for this year's CoilCon Exclusive
Set. Obviously, I was excited at the
opportunity!
Jay already had a lot of the character
information sketched out with significant contributions from Moira Hunger and Jon
Cremeans, so the file cards needed very little from me. The information had to be trimmed down to fit
on the cards, but these are the original, unedited cards...
CODE NAME: Dodger
Experimental Equipment
Expert
File Name: Renwick, Richard
Grade: E-7
Birthplace: South Bend, Indiana
Primary Specialty: Experimental Equipment
Secondary Specialty: Special Operations
Grade: E-7
Birthplace: South Bend, Indiana
Primary Specialty: Experimental Equipment
Secondary Specialty: Special Operations
The only surviving member of BattleForce 2000,
Dodger is the G.I. Joe Team's authority on all types of experimental equipment.
When he’s not helping to repair vehicles and gear damaged in combat, he is off
working to develop new, cutting-edge hardware that will help keep his teammates
one step ahead of their many adversaries. As if that isn’t enough, he is also
quite a good cook and has been known to prepare elaborate meals for his
teammates on occasion. Dodger tends to be something of a perfectionist. His
tenacity and commitment to mission accomplishment is virtually unparalleled.
Because of this, Dodger is one of several Joes semi-permanently assigned to a
task force created to locate and capture COIL agents around the globe.
CODENAME: ZILANT
Guerrilla Fighter
File Name: Classified
Birthplace: Classified
Primary Specialty: Guerrilla Warfare
Secondary Specialty: Airborne Operations
Birthplace: Classified
Primary Specialty: Guerrilla Warfare
Secondary Specialty: Airborne Operations
A legendary creature from Russian and Tatar
myth, the zilant is a fearsome winged snake. Sometimes helpful, sometimes
destructive, they are known for fiercely protecting their homes from incursion.
Zilant was born in a small town in the Eastern European nation of Tatahkstan
where he grew up sharing his father’s passion for building and flying
ultralight aircraft. Following the
dissolution of the Soviet Union, Tatahkstan chose to remain independent and Zilant joined his nation’s fledgling armed
forces, committing himself to keeping his land free from occupying forces. When
Tatahkstan was later ravaged by heavy fighting between G.I. Joe and Cobra,
Zilant was able to escape the carnage in one of his father’s aircraft. Driven
by a desire to rid his homeland of outside oppression, he joined the COIL and
used their resources to raise a homegrown force to repel both foreign armies.
He combined it with his knowledge of light aircraft to become an authority in
the development and use of ultralight aircraft, gliders and windsuits as a
method of covertly inserting special ops troops. Recently, there's been a new
force intent on invading his homeland, so Zilant is taking action once again.
He thought that he had faced and defeated his enemies, but is this new man his
ultimate enemy?
---
So without further ado, here is the
background story for the 2012 CoilCon Exclusive...
Tatahkstan, Eastern Europe
1430 hours, local time
1430 hours, local time
It had been like this for nearly two months
now; humping the bush all day with nary a sign of his quarry. The only
leads coming from the locals; rumors regarding the ‘winged serpent’ that
protects their homeland. General Hawk had been prepared to bring him home
two weeks ago, but Sergeant First Class Richard Renwick, codenamed Dodger, was
nothing if not thorough. The information was sketchy at best, but he’d
requested a resupply drop nonetheless, and had continued with his mission.
Now, frustrated and low on supplies, Dodger was ready to pack it in.
He paused in the shade of rock outcropping, wiped the sweat from his brow
and then consulted his GPS. He had a couple more klicks to cover on his
current patrol route before he would arrive back at his bivouac site.
Definitely calling for extraction after this circuit, he told himself.
***
Tatahkstan had been peaceful for some time now,
and the wounds of war were slowly healing. But this new intruder
threatened all of that. For two days now, Zilant had stalked him from a
distance. Thus far, the man had found nothing to indicate that the COIL
was not only surviving, but thriving here. But the man was tenacious and his
skills were formidable, that much was certain. Zilant struggled again
with the decision to simply kill him and be done with it. But Zilant was
no fool; deep down, he knew that it wouldn’t be the end. If the man
disappeared, others would come to look for him. Better to let him find
nothing and then leave of his own accord. He’d report back to his masters
and Tatahkstan would remain at peace. Yes, patience was called for in
this case. Still, the man was nearing one of the COIL’s early warning
Observation Posts. The guerrilla fighters manning it had been alerted to
the intruder’s presence and would make every effort to remain undetected.
But if he were to stumble upon the OP, then there would be no other
choice. Time to change positions, Zilant thought to himself as he
deployed his backpack glider.
***
The heat was oppressive this late in the day
and Dodger paused next to a deep gorge to pull out a canteen. His bivouac
site was almost directly across the gorge and Dodger briefly considered
breaking out his portable glider to hop across the gorge. It would have
been easy to do so, but it would have cut his patrol route short. Easy is
for wimps, he told himself. As he tipped his head back to drink, he
caught a flash of movement. A bird? No... a glider!
***
Zilant cursed under his breath as he realized
that he’d been spotted. Action was now unavoidable.
***
Dodger used his hand to block the sun’s glare
as he studied the glider circling overhead. He heard the ricochet and cursed
himself as an amateur; standing in the open, gawking at the glider while its
pilot lined him up in his sights. Dodger ran hard for the treeline to his
right, as three more shots struck the rocks behind him.
***
Zilant was furious. He circled again, but
saw no sign of his target. He needed to end this quickly, before the man
was able to report back to his masters. A disappearance was one thing,
but a confirmed report of enemy combatants was quite another.
***
Dodger crept toward the edge of the treeline,
craning his head as he looked for his attacker. He saw nothing and pulled
back to consider his options. Hawk needed to know about this as quickly
as possible, but his Sat-Comm unit was hidden safely away near his bivouac
site. To reach it, he could circle the gorge, remaining concealed by the
forest, but that would take hours. The faster way would be to unpack his glider and shoot across the gorge.
***
Zilant caught the movement below and was
astonished to see a black glider clear the edge of the gorge, headed for the
opposite side. He wheeled his own glider around and dove after his prey.
---
I hope you dug it and I expect to see some of
you this weekend at CoilCon!
Until next time, Weir Aybidin!
Wednesday, September 5, 2012
What's next for Tales from Castle Destro?
Now that Volume III of Tales from Castle Destro is complete,
several people have asked me what I plan to do next. If my friend
Nathan asks, then the answer is that I'm retiring from writing (he gets upset when I say that). But in truth, I plan to slow down a bit.
Once my pal Hugh finishes the cover art (which I sprang on his rather unexpectedly), I'll publish the collected chapters of Volume III as another e-book.
This weekend, I'll be attending CoilCon at Kokomo Toys. I hope to run into a few of you there. If I don't completely fail to remember to take pictures, I'll post some of them here, as well as on the Tales from Castle Destro Facebook page.
After that, I'm planning to do some reading of my own. Since I began writing this stuff, I've had the pleasure of discovering some fan-fic authors that I greatly enjoy reading. Until I have something new for you, I'll try to share some work that appeals to me in hopes that you'll like it, too.
One such author is a lady who publishes at fanfiction.net under the name Catswings1026. She writes a variety of different things, but the stories I enjoyed most were the ones inspired by IDW's Hearts and Minds by Max Brooks. Here is one of them: Hearts and Minds: Hard Drive.
Captain Flaherty and the other Iron Grenadiers will be back soon.
Once my pal Hugh finishes the cover art (which I sprang on his rather unexpectedly), I'll publish the collected chapters of Volume III as another e-book.
This weekend, I'll be attending CoilCon at Kokomo Toys. I hope to run into a few of you there. If I don't completely fail to remember to take pictures, I'll post some of them here, as well as on the Tales from Castle Destro Facebook page.
After that, I'm planning to do some reading of my own. Since I began writing this stuff, I've had the pleasure of discovering some fan-fic authors that I greatly enjoy reading. Until I have something new for you, I'll try to share some work that appeals to me in hopes that you'll like it, too.
One such author is a lady who publishes at fanfiction.net under the name Catswings1026. She writes a variety of different things, but the stories I enjoyed most were the ones inspired by IDW's Hearts and Minds by Max Brooks. Here is one of them: Hearts and Minds: Hard Drive.
Captain Flaherty and the other Iron Grenadiers will be back soon.
Friday, August 31, 2012
Pathfinder (Jungle Assault Specialist)
I've never had a lot of love for Pathfinder as he was introduced after I stopped collecting Joes. My little brother had him and I vaguely recall him only because he was released with one of the most ridiculous accessories ever - the giant weedeater. Otherwise, the design was pretty good. So my Jungle Assault Specialist gets a simple machete and an assault rifle. Oh, and I substituted OD green for the turquoise used in his original camouflage pattern. Lately, a lot of my customs have been aimed at being as 'paint-free' as possible, to keep joint rub to a minimum. This is a perfect example of this trend. The only paint on this guy is the head, the vest and the camouflage pattern on his trousers.
Monday, August 27, 2012
More Combat Photography
I threw together a small 'urban battlefield' scene today and wanted to take some pics. It would probably look a little better if I had bothered to do anything with the lighting, but I was feeling kinda lazy by the time I finished the diorama...

A Gravedigger anti-armor assaultman awaits orders.
A Grenadier Officer issues orders to his Sergeants.
Cremators are flame weapon troopers attached to infantry platoons during combat.
Hunting the enemy.
Infantry Officers are often equipped with special helmets which allow them to communicate with higher command back in Scotland, no matter where they are in the world.
Captain Flaherty and Sergeant King make their way through the rubble after dismounting their DEMONs.
Sunday, August 26, 2012
COIL Elite Guardsman
The Crimson Guard High Command is fond of saying that no one ever leaves the fold alive. But this is not exactly true. Myles Pollack, previously known as Fred XXVII, received wounds in a firefight against G.I. Joe operatives that left him with light facial scarring. Because he no longer looked exactly like the other Fred-series Crimson Guardsmen, he was dismissed from the Guard and reassigned to menial labor duties within Cobra. When the COIL broke free from Cobra and struck out on their own, Pollack became the only CG to leave Cobra and join them. Once the Paoli brothers discovered his defection, they began sending men to locate and kill Pollack. The result thus far has been several dead Crimson Guardsmen.
This was an idea that popped into my head as soon as I saw the black Dollar General Cobra Commander figure. The entire job took me about 30 minutes from start to finish. Thanks to COIL Club member Don Neal for the figure!
This was an idea that popped into my head as soon as I saw the black Dollar General Cobra Commander figure. The entire job took me about 30 minutes from start to finish. Thanks to COIL Club member Don Neal for the figure!
Fast Draw (Mobile Missile Specialist)
This was a simple and fun custom to do. Basically, it's a PoC Blowtorch figure dyed black and then painted with a paint scheme resembling the original Fast Draw figure. The helmeted head and rocket equipment all came from the vintage figure. As is sometimes the case with dyed figures, the black dye kept bleeding through the paint and I had to touch up the paint a few times. There is still a little bit of 'bleed through', but I decided that I kind of liked the look (battle-weathered), so I left it as is. Additionally, I dry-brushed a little bit of metallic colors to simulate paint wear on the suit's heat-resistant protective plates.
Monday, August 13, 2012
Tomahawk Assault Transport Helicopter
I never owned a Tomahawk as a kid. It was one of the few items I would really have loved, but just never managed to save up enough allowance for. So while completing my Dragonfly restoration, I started accumulating the parts for this project. I've actually had them all for a little while now, but the backlog of other projects has kept me from diving into it until now. Like the Dragonfly, I wanted to pack as much 'real world' detail in as I could manage, so I knew it wouldn't be a matter of slapping new decals on and calling it 'done'.
Day One (08/12/2012) - The entire helo was disassembled and the decals were stripped off. A fellow customizer suggested that I use WD-40 to soften up the crusty old adhesive residue. I had used Goo Gone for this in the past, and it worked far better than the WD-40 did in this case - however, the Goo Gone tended to strip away the factory paint and I really didn't want to have to fix it afterward. So WD-40 and elbow grease was the name of the game. It took a while, but eventually it got the job done. Once I was satisfied with the adhesive removal, I washed every single piece in warm water using Dawn dishwashing liquid to scrub them clean. This entire process took a few hours, so when I was done, I laid out all of the parts to dry overnight and called it a day.
Day Two (08/13/2012) - Today I spent a while Googling images of the interior of military troops transport helicopters to augment the memories I had of a few hundred flights I took in the Marines. It turns out that not very much has changed in the twelve years since I left active duty. The interior of every modern helo I looked at was light grey, so I spray painted the insides of the engine covers and the two fuselage halves with a light primer grey. Not only is this more accurate to real military helos, but the lighter color should help to make the interior details far more visible.
As long as I was spray painting, I took the detachable engine pieces and spray painted them a metallic gunmetal color. It's not too different from their original color, but now they look metallic, rather than grey plastic. I taped off the tail ramp and sprayed the deck surfaces with this color, as well.
Day Three (08/14/2012) - I taped off the areas around the sculpted engine panels on the fuselage halves and spray painted them black. Once dry, I gave them a light shot of the metallic gunmetal. While they were drying, I move on to detailing the deck plate. The seat covers were painted flat black in accordance with my reference photos. I added the cockpit decal along with some extras. I did the same thing for the troop bay, painting the sculpted details and adding some extra decals.
My next step was improving the weapons package on this thing. I love that they included door guns with this, but they looked like some sort of weird lasers, so I chopped them off and kept the mounts. A little work with the X-acto knife and the mounts were able to support an M-2 .50 caliber machinegun on the port side and a Mk-19 40mm machinegun on the starboard side. Not only are these both real world weapon systems, but they are a significant upgrade to what we started with.
Day Four (08/18/2012) - Today, I added a little more detail to the interior - especially the cockpit. It's a little hard to get a decent camera angle that will show the cockpit instrument panel, so you'll have to take my word for it.
I also started adding the ordnance. I decided to spruce up the larger white missiles with some yellow striping, a painted fuse tip and a small decal so that they bore a reasonable resemblance to the Joint Air-to-Ground Missile.
The smaller grey bombs are being repainted in a 'standard' HE paint scheme - olive drab with yellow markings and silver fuses. I hope to have those done by tomorrow.
Day Five (08/19/2012) - I finished up the bombs when I got home from work this morning. Once they were added to the wing pylons, all I had left was a bit of weathering. I used steel paint to touch up anywhere that the camo had been scratched off by the original owner. This was done for two reasons; first, to simulate the normal wear and tear that all military equipment experiences and second, because it was easier than paint-matching the original color! I used a butane lighter to carefully darken the areas around the engine exhaust. This is a trick I picked up years ago while customizing Star Wars vehicles. It simulates the carbon build-up around the exhaust ports reasonably well and can be wiped away with a wet paper towel if you decide you don't like it. Once the helo was finished, I just needed to add the pilot, Lift Ticket, and the co-pilot, Glenda.
When I have some time, I will find a good spot outdoors and do some 'combat photography' with the Tomahawk. This project was a lot of fun. I hope you dig it!
Day One (08/12/2012) - The entire helo was disassembled and the decals were stripped off. A fellow customizer suggested that I use WD-40 to soften up the crusty old adhesive residue. I had used Goo Gone for this in the past, and it worked far better than the WD-40 did in this case - however, the Goo Gone tended to strip away the factory paint and I really didn't want to have to fix it afterward. So WD-40 and elbow grease was the name of the game. It took a while, but eventually it got the job done. Once I was satisfied with the adhesive removal, I washed every single piece in warm water using Dawn dishwashing liquid to scrub them clean. This entire process took a few hours, so when I was done, I laid out all of the parts to dry overnight and called it a day.
Day Two (08/13/2012) - Today I spent a while Googling images of the interior of military troops transport helicopters to augment the memories I had of a few hundred flights I took in the Marines. It turns out that not very much has changed in the twelve years since I left active duty. The interior of every modern helo I looked at was light grey, so I spray painted the insides of the engine covers and the two fuselage halves with a light primer grey. Not only is this more accurate to real military helos, but the lighter color should help to make the interior details far more visible.
As long as I was spray painting, I took the detachable engine pieces and spray painted them a metallic gunmetal color. It's not too different from their original color, but now they look metallic, rather than grey plastic. I taped off the tail ramp and sprayed the deck surfaces with this color, as well.
Day Three (08/14/2012) - I taped off the areas around the sculpted engine panels on the fuselage halves and spray painted them black. Once dry, I gave them a light shot of the metallic gunmetal. While they were drying, I move on to detailing the deck plate. The seat covers were painted flat black in accordance with my reference photos. I added the cockpit decal along with some extras. I did the same thing for the troop bay, painting the sculpted details and adding some extra decals.
My next step was improving the weapons package on this thing. I love that they included door guns with this, but they looked like some sort of weird lasers, so I chopped them off and kept the mounts. A little work with the X-acto knife and the mounts were able to support an M-2 .50 caliber machinegun on the port side and a Mk-19 40mm machinegun on the starboard side. Not only are these both real world weapon systems, but they are a significant upgrade to what we started with.
Day Four (08/18/2012) - Today, I added a little more detail to the interior - especially the cockpit. It's a little hard to get a decent camera angle that will show the cockpit instrument panel, so you'll have to take my word for it.
I also started adding the ordnance. I decided to spruce up the larger white missiles with some yellow striping, a painted fuse tip and a small decal so that they bore a reasonable resemblance to the Joint Air-to-Ground Missile.
The smaller grey bombs are being repainted in a 'standard' HE paint scheme - olive drab with yellow markings and silver fuses. I hope to have those done by tomorrow.
Day Five (08/19/2012) - I finished up the bombs when I got home from work this morning. Once they were added to the wing pylons, all I had left was a bit of weathering. I used steel paint to touch up anywhere that the camo had been scratched off by the original owner. This was done for two reasons; first, to simulate the normal wear and tear that all military equipment experiences and second, because it was easier than paint-matching the original color! I used a butane lighter to carefully darken the areas around the engine exhaust. This is a trick I picked up years ago while customizing Star Wars vehicles. It simulates the carbon build-up around the exhaust ports reasonably well and can be wiped away with a wet paper towel if you decide you don't like it. Once the helo was finished, I just needed to add the pilot, Lift Ticket, and the co-pilot, Glenda.
When I have some time, I will find a good spot outdoors and do some 'combat photography' with the Tomahawk. This project was a lot of fun. I hope you dig it!
Tuesday, July 31, 2012
Cobra Airborne Training
I recently picked up a pair of Retaliation Cobra Troopers for a custom project. I was pretty impressed with the parachutes that were packed in with them and so I gave one to each of my kids. Adam promptly put his chute on his 25th Python Crimson Guard, while Kate chose to use her DoCI Night Creeper. Needless to say, a good time was had by all!
Thursday, July 26, 2012
Iron Grenadier Unit Composition
Recently, some friends and I began throwing around ideas for new Iron Grenadier trooper classifications. This led me to wonder what a standard Grenadier infantry company would look like. This is what we came up with:
1st Platoon (30 men):
Iron Grenadier (Infantryman) - The term 'regular infantry' hardly applies to the elite warriors that compose the Iron Grenadiers' conventional infantry units. These battle-hardened veterans are recruited from around the world and are then equipped with the finest war fighting gear ever produced. Each Grenadier wears a lightweight composite armor over his black uniform. This, combined with the signature 'sharkfin' helmet and Grenadier facemask protect the wearer from direct and indirect fire weapons, as well as a wide range of chemical-biological-radiological hazards. Their standard weapon is the MARS-41A assault rifle, which fires a 10mm explosive-tipped, caseless, light armor-piercing round. The weapon also features a 30mm pump-action grenade launcher. Equipment belts vary depending upon the Grenadier's duties within his unit, but most Grenadiers will tend to carry six 30-round rifle magazines, three hand grenades, a utility pouch and a canteen. The ceremonial sword that is part of every Grenadier's garrison uniform is usually not carried during combat operations as a matter of practicality.
The Trooper classifications listed above are those organic to the standard Iron Grenadier infantry company. Depending upon the mission requirements, additional trooper classifications may be temporarily 'attached' to the company, to include:
Company Command Element (3 men):
1x Company Commander (Captain)
1x Executive Officer (Lieutenant)
1x Company First Sergeant (First Sergeant)
1st Platoon (30 men):
1x Platoon Commander (Lieutenant)
1x Platoon Sergeant (Sergeant)
1x Combat Medic
27x Infantrymen (organized into 3 squads of 9 men; each squad consisting of one Sergeant commanding two 4-man teams)
27x Infantrymen (organized into 3 squads of 9 men; each squad consisting of one Sergeant commanding two 4-man teams)
2nd Platoon (30 men):
1x Platoon Commander (Lieutenant)
1x Platoon Sergeant (Sergeant)
1x Combat Medic
27x Infantrymen (organized into 3 squads of 9 men; each squad consisting of one Sergeant commanding two 4-man teams)
3rd Platoon (30 men):
1x Platoon Commander (Lieutenant)
1x Platoon Sergeant (Sergeant)
1x Combat Medic
27x Infantrymen (organized into 3 squads of 9 men; each squad consisting of one Sergeant commanding two 4-man teams)
Weapons Platoon (27 men):
1x Platoon Commander (Lieutenant)
1x Platoon Sergeant (Sergeant)
6x Heavy Machinegunners (Reapers)
6x Anti-Armor Specialists (Gravediggers)
6x Flame Weapons Specialists (Cremators)
7x Mortar Specialists
Note: When deployed, each platoon (1st, 2nd and 3rd) would receive a Fire Support Squad consisting of 2 Reapers, 2 Gravediggers and 2 Cremators. These squads would remain assigned to their respective platoons until the company concluded it's operation and returned to garrison.
Iron Grenadier (Infantry Officer) - Infantry Officers are equipped much the same as other Infantrymen, with the notable exception of the helmet. Officers commanding units of platoon size or greater are issued special helmets which allow them global communications. This allows higher command at Castle Destro to communicate directly with battlefield commanders around the world.
Reaper (Heavy Machinegunner) - The life expectancy of a machine gunner in combat is normally measured in seconds. Despite this, the Reapers have an impressive survival record due largely to their sheer tenacity and refusal to accept defeat, or even slow down when wounded. Reapers are equipped with the MARS-56A2 squad fire-support weapon, a 10mm general-purpose machine gun with an effective rage of up to 1500 meters.
Gravedigger (Anti-Armor Specialist) - Anyone
with a rocket launcher, 15 minutes of training and a little luck is
capable of taking out an armored vehicle. Gravediggers make anti-armor
warfare an art form. They are specialists in all known anti-armor
rocket and missile systems, as well as anti-tank mines and other more
exotic means of defeating armor systems.
Cremator (Flame Weapons Specialist) - These are some of the nastiest individuals within the ranks of the Iron Grenadiers. The Cremator's primary weapon system is the MARS-240 Flame Unit, which is designed for close combat
situations at the squad and fireteam level. The weapon uses
a pressurized form of napalm which is ignited
at the nozzle burner, and can be used to cover an area up to
25 meters. With a standard fuel
reservoir good for up to 20 bursts, the flame-thrower is considered
to be one of the most fierce weapons in the MARS armory. However, the fuel reservoir has a tendency to rupture violently when hit
by shrapnel or from small arms fire.
The Trooper classifications listed above are those organic to the standard Iron Grenadier infantry company. Depending upon the mission requirements, additional trooper classifications may be temporarily 'attached' to the company, to include:
Detonator (Demolitions Specialist)
Saturday, July 21, 2012
Yoda's Summer Vacation
If you've been around the blog for a while, you've probably seen me mention that my wife used to do customs, as well. She stopped doing them before our 'site' was moved here from AOL Hometown, but I still have a lot of her old work so I thought it might be neat to show some of it off.
Of all the things she made, this Star Wars Cinema Scene is my favorite and to this day, it hangs on the wall in Our Basement Workshop. It was made using the packaging from a 'Purchase of the Droids' cinema scene. She called it 'Yoda's Summer Vacation'.
Of all the things she made, this Star Wars Cinema Scene is my favorite and to this day, it hangs on the wall in Our Basement Workshop. It was made using the packaging from a 'Purchase of the Droids' cinema scene. She called it 'Yoda's Summer Vacation'.
Tuesday, July 17, 2012
Tutorial - Dyeing Figures & Parts
I've been asked about my technique for this so many times that I figured it was probably about time for me to put something together. I strongly recommend this video by Ratfink. It's the one I used when I was experimenting with dye for the first time. So anyway, this is my feeble tutorial on how to dye figures and parts.
First, you should understand that dyeing is almost always going to be a precursor to painting, not a substitute for it. Anyone who has painted a joint knows that once you move the joint, you almost always have paint that rubs off, revealing the original color of the plastic. I have found dyeing to be a fantastic way to avoid having to paint joints. The color I most often use is black because it works well in the shoulder, elbow and knee joints of a G.I. Joe figure. No matter what color the rest of the figure is going to be, hints of black at the joints don't look nearly as out of place as say, red or white. Also, you will find that the dye will work better on the softer plastic of heads, hands, feet, arms and lower legs. It often works poorly on the harder plastic used for torsos and upper legs. But that's okay - remember, you're going to be painting. The dye is just going to reduce the amount required.
Next, you need to make sure you have all of the tools. This may differ from one person to the next, but when I dye figures I use powdered RIT dye, an old saucepan and a strainer. The dye can be purchased at most department stores for a dollar or two per box. I bought the strainer at WalMart for about $5. The saucepan was once my wife's, but after the first time I 'borrowed' it for dyeing stuff, she donated it to Our Basement Workshop. Isn't she awesome? I also have a ratty old towel that I keep on hand specifically for dyeing stuff. No matter how careful you are, you will make a mess. I strongly recommend using something to cover any counter tops that you (or your significant other) don't want permanently discolored. Also consider picking up some rubber gloves. They will keep your hands from looking funny for the next several days.
Frequently, the dye will not seep all the way into the joints, so you need to help it along. You'll want to prepare your parts for dyeing by moving all of the joints as far as they'll go in one direction. In the photo, you'll see that all of the arms and legs have been repositioned with their joints exposed. They will go into the dye just like this. After they've been dyed, you'll reverse the joint all the way in the opposite direction and repeat.
So the next step is to get your dye ready. I'm not going to re-type the directions on the package - you're capable of reading and following them for yourself. The short story is that you'll mix the powdered dye with very hot water. Some people will mix the dye with hot water from the tap, but don't do it on the stove top. I have found that the hotter the dye, the better it penetrates the item you're dyeing. Therefore, I keep the saucepan filled with dye on the burner and adjust the temperature so that it stays just below boiling. I place the first figure or part into the strainer and lay carefully the strainer over the top of the saucepan so that the item is submerged. As each item comes out of the dye, you'll want to lay it on the folded towel. Better that the excess dye soaks into this than the counter tops. Trust me on this - I've spent too much time scrubbing dye off the counter tops and some of it never came off. This process is repeated/continued until all of the parts have been dyed.
After the parts have been dyed, I recommend letting them sit for quite a while. Not only will they be hot, but the dye will probably manage to seep inside the figure, so excessive handling will cause it to run out onto your fingers. The photo to the right shows the results of dyeing the same parts in black. Note that the torso on the second figure is a reddish color, rather than black. Also, looking at the four pairs of Cobra Diver legs, you'll see that the upper legs are still mostly red. Like I said, you will still be doing some painting, but now there is much less.
When all of the figures that these parts are intended for are complete, I'll post pics in this tutorial to show how they turned out. If anyone has questions on the process, feel free to contact me or (even better) leave a comment at the bottom of this post and I'll answer it publicly so that others can benefit from the answer.
Happy customizing!
Monday, July 16, 2012
Subscribe to:
Posts (Atom)










































